全国24小时服务热线： 0757-86433763
Production capacity: 80 ~ 110 boxes / min Box size: (45-180) * (30-85) * (12-50) mm Specification size: (70-200) * (70-140) mm Power: 50 Hz 380V 1.5kw Air consumption: 10 ~ 15L / min Vacuum suction: - 0.6MPa (with vacuum generator) Weight: about 850kg Dimension: 2100 * 1100 * 1700mm Carton requirements: 250-350 g / m2 Specification requirements: 50-60g / m2
Multi-functional cartoning operation, all kinds of complex packing work completed at the same time; Don\\\'t take up space, give full play to the function; Stepwise movement, double vacuum cup pickup carton, high speed and stability; Optional date batch printer and manual insertion device; PLC control, trouble shooting display device, easy to operate; The inching device of the machine makes the equipment can be moved at will, which is convenient to adjust cartons of various specifications.
(1) The speed of the machine is limited by the speed of the instruction manual and the drug plate, so the design should be more reasonable; (2) After a long time of high-speed operation, the stability of the machine is poor, which requires stable operation and more use of servo system; (3) After running for a long time, the accuracy can not meet the requirements, and the synchronization is not good, so the reliability is required to be improved; (4) The adaptability of the product is low, its function is relatively simple, the application range is relatively narrow, and there are strict regulations on the shape and volume of the drug to be loaded; (5) The operation reliability of the equipment is not high, and the production schedule is affected by frequent maintenance; (6) The production efficiency is not high, the running speed is slow, and the degree of automation is not high; (7) The packing machine is very sensitive to the size deviation of the instructions. For example, the size deviation of the instructions should be less than ± 0.5 mm. In daily production, the machine will be jammed due to the thin instructions. Sometimes, the paper box is not easy to be opened or jammed due to slight changes in the size of the carton.
The feeding of the automatic cartoning machine is generally divided into three entrances: the entrance of the manual, the entrance of the medicine bottle and the entrance of the packing machine. The whole process from the carton feeding to the final packaging molding can be roughly divided into four stages:loading carton, opening, filling material and closing the lid. carton under the action is usually controlled by a sucker a carton from the carton inlet, down to the boxes on the main line, by a guide rail screens will open the carton box fixed with a push plate, at the same time there will be two screens can be move forward rising from below, from the front and rear direction gets stuck on the side of the carton, make a right Angle carton open and reach to the loading area. After filling the loading area, the mechanism of the machine will fold the ear into the left and right guide rails, and then conduct the closing action. Before closing the lid, the mechanism will first bend the tongue of the carton, and then a push board will push the lid to bend, so that the tongue will be inserted into the carton and make the lock QQ tight. The closing action is a key action, which is closely related to the structure of the carton and the accuracy of the machine adjustment.
It adopts automatic vacuum carton opening packaging mode, manual feeding conveyor, mechanical operation by the chain, automatic ear feeding and automatic feeding during operation, spray and press forming. After the carton is folded flat on the carton bracket, the cylinder with vacuum sucker is stretched out, holding the bottom of the carton and pulling the carton down on the guide rail working surface; When the chain moves forward, the bracket rod on the guide rail will fold the front small face back step by step. The chain will run, and the rotating ear will be put into position during the mechanical movement. Export transverse from vertical packaging machine to pack box machine, conveyor, motion state automatically push the items into the box, hot melt adhesive in the operation of the injection side, on both sides of cartons in the operation of the small fold down step by step and compaction, hot melt adhesive curing, steel seal in the operation of the automatic print date, clear font, environmental protection, a month can save printing consumables of nearly ten thousand yuan, and output packaged forming the carton packaging.
Congratulations on the successful upgrade of official website of Foshan Jinyi Intelligent Equipment Co., Ltd
